GSO ISO 8062-3:2021
Gulf Standard
Current Edition
·
Approved on
01 July 2021
·
Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings
GSO ISO 8062-3:2021 Files
English
30 Pages
Current Edition
Reference Language
66.43 OMR
GSO ISO 8062-3:2021 Scope
ISO 8062-3:2007 specifies general dimensional and geometrical tolerances, as well as machining allowance grades, for castings as delivered to the purchaser in accordance with ISO 8062-2. It is applicable for the tolerancing of dimensions and geometry, and required machining allowance of castings in all cast metals and their alloys produced by various casting manufacturing processes.
ISO 8062-3:2007 applies to both general dimensional and general geometrical tolerances, unless otherwise specified.
The dimensional tolerances covered by ISO 8062-3:2007 are tolerances for linear dimensions.
The geometrical tolerances covered by ISO 8062-3:2007 are:
- tolerances for straightness,
- flatness,
- roundness,
- parallelism,
- perpendicularity,
- symmetry, and
- coaxiality.
ISO 8062-3:2007 can be used for the selection of tolerance values for individual indications.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
OS GSO OIML R121:2007
GSO OIML R121:2007
Omani Standard
The Scale of Relative Humidity of Air
Certified Against Saturated Salt Solutions
GSO OIML R121:2007
OIML R 121:1996
Gulf Standard
The Scale of Relative Humidity of Air
Certified Against Saturated Salt Solutions
Recently Published from Metrology Sector
GSO ISO 10360-10:2024
ISO 10360-10:2021
Gulf Standard
Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring systems (CMS) — Part 10: Laser trackers
GSO ISO 7626-5:2024
ISO 7626-5:2019
Gulf Standard
Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
GSO IEC 62828-4:2024
IEC 62828-4:2020
Gulf Standard
Reference conditions and procedures for testing industrial and process measurement transmitters - Part 4: Specific procedures for level transmitters
GSO ISO 11807-1:2024
ISO 11807-1:2021
Gulf Standard
Integrated optics — Vocabulary — Part 1: Optical waveguide basic terms and symbols